Safety - Tech Controllers L-7 User Manual

User's manual
I. Safety
Before using the device for the fi rst time the user should read the following regulations
carefully. Not obeying the rules included in this manual may lead to personal injuries
or controller damage. The user's manual should be stored in a safe place for further
reference. In order to avoid accidents and errors it should be ensured that every person
using the device has familiarized themselves with the principle of operation as well as
security functions of the controller. If the device is to be sold or put in a diff erent place,
make sure that the user's manual is there with the device so that any potential user has
access to essential information about the device.
The manufacturer does not accept responsibility for any injuries or damage resulting from
negligence; therefore, users are obliged to take the necessary safety measures listed in
this manual to protect their lives and property.
WARNING WARNING
• High voltage! Make sure the regulator is disconnected from the mains before performing
any activities involving the power supply (plugging cables, installing the device etc.)
• The device should be installed by a qualifi ed electrician.
• Before starting the controller, the user shoud measure earthing resistance of the
electric motors as well as the insulation resistance of the cables.
• The regulator should not be operated by children.
WARNING
• The device may be damaged if struck by a lightning. Make sure the plug is disconnected
from the power supply during storm.
• Any use other than specifi ed by the manufacturer is forbidden.
• Before and during the heating season, the controller should be checked for condition of
its cables. The user should also check if the controller is properly mounted and clean
it if dusty or dirty.
Changes in the merchandise described in the manual may have been introduced
subsequent to its completion on February 28th 2016. The manufacturer retains the right
to introduce changes to the structure. The illustrations may include additional equipment.
Print technology may result in diff erences in colours shown.
We are committed to protecting the environment. Manufacturing electronic
devices imposes an obligation of providing for environmentally safe
disposal of used electronic components and devices. Hence, we have been
entered into a register kept by the Inspection For Environmental Protection.
The crossed-out bin symbol on a product means that the product may not
be disposed of to household waste containers. Recycling of wastes helps to
protect the environment. The user is obliged to transfer their used
equipment to a collection point where all electric and electronic components
will be recycled.
4