Table of Contents
Advertisement
Requirements
The BluStar for Conference Room system requires the following environment/items:
•
BluStar for Conference Room system
•
BluStar Application Server or SIP-based IP PBX system (e.g. Aastra 5000, Aastra MX-ONE) installed and running with a
SIP account created for the BluStar for Conference Room system
•
Ethernet/Fast Ethernet LAN (10/100 Mbps), Gigabit Ethernet LAN (1000 Mbps) recommended
•
1280x720p capable display (i.e. television, monitor, or projector) with HDMI available input port
Additional components such as a microphone system, speakers, video camera, and keyboard are required. To ensure ease-
of-use and interoperability, Aastra recommends that the BluStar for Conference Room system be used with the following
additional products:
•
Aastra S850i Wireless Conference Phone System and Wireless Base Unit
•
HD Color Video Camera
•
Wireless USB Keyboard with USB RF Receiver
These additional components can be purchased directly through Aastra as an all-inclusive kit (including the BluStar for
Conference Room system) or as individual components. Contact your Aastra representative for more information.
Note:
This Installation Guide assumes that Aastra's recommended additional components are being used with the BluStar for
Conference Room system. If you choose to utilize other components, please refer to the documentation included with
the respective component for configuration options and procedures.
BLUSTAR APPLICATION SERVER OR
SIP-BASED IP PBX SYSTEM
INTERNET
41-001501-00 REV01 – 08.2013
1280x720p
CAPABLE DISPLAY
ROUTER
SIP IP PHONE
BLUSTAR 8000i DESKTOP MEDIA
PHONE
AASTRA S850i WIRELESS CONFERENCE
PHONE SYSTEM AND WIRELESS BASE UNIT
GIGABIT ETHERNET
LAN
WIRELESS USB KEYBOARD w/
USB RF RECEIVER
BLUSTAR FOR PC
Introduction
HD COLOR
VIDEO CAMERA
BLUSTAR FOR
iPAD and
iPHONE
3
Advertisement
Table of Contents
