Programming Mode - Deckma Hamburg OMD-2008 Instruction Manual

10.4 Programming Mode

ESC
TEST
ON AL1 AL2
LOG
Initial Display.
Will disappear a few
seconds after power
up.
Issue: 25.09.2015 preliminaryInstruction Manual OMD-2008 (All Versions)
DECKMA HAMBURG GmbH
OK
SET
SYS
OMD-2008
There are 3 groups of push buttons to
control the functions of the display.
Navigation buttons are in group 1.
Functional buttons are group 2. Group 3 is
1
for data logger operation.
In the programming mode the alarm set
2
points, the time delays, and the offsets can
be modified. It is also possible to reset to
3
the factory default values at any time.
The clock is factory set for GMT,
Greenwich Mean Time, and cannot be
changed.
Normal Operation
Display.
Pressing the
OK
button will display
additional
information.
Pressing the
button will display
more detailed
Exit from
SYSTEM-info
menu by pressing
Refer to Fault
finding table in
manual for
explanations of
status information.
Page 24 of 28