Deckma Hamburg OMD-2008 Instruction Manual page 26

AL2
AL1
Pressing the AL1 button
leads into SETTINGS
menu, Alarm1 settings
preselected.
Pressing the Al2 button
leads into SETTINGS
menu, Alarm2 settings
preselected.
SET
Pressing the SET
button from Normal
Operations Display
leads into
SETTINGS menu,
set default option
preselected.
Issue: 25.09.2015 preliminaryInstruction Manual OMD-2008 (All Versions)
DECKMA HAMBURG GmbH
At the SETTINGS
menu the alarms,
time delays, the
Offset and optionally
the output signal can
be modified within
SET
the limitations.
Select the required
point by using the „+"
or „-„ button. To
modify settings press
the
At the SETTINGS
menu the all settings
can be reset to the
factory default
SET
values. To reset to
factory values once
again press the
To change the
value, press the
"+" or "-" button.
To change the
value, press the
"+" or "-" button.
button.
To change the
value, press the
"+" or "-" button.
To change to
"yes", press the
"+" button.
Confirm with "OK"
to reset all settings
to the factory
default settings.
Page 25 of 28