Table of Contents
Advertisement
Instruction Manual
2.
Mounting of IMBus modules
2.1 Mechanic connection of IMBus modules
1.) Push the red leavers of the first module out and turn them up.
2.) Connect the modules together.
3.) Turn red levers down to lock the modules.
4.) Connect further modules by the same way.
2.2 Connection of IMB-Connection cable ( IMB-usb / IMB-232 )
1.) For fixing the IMB-Connection cable replace the two screws by pins
!!! The pins are part of the shipment of the IMB-Connection cable
2.) Secure the IMB-Connection cable on the pins by screwing :
On extended bus systems or on IMB-232 connection cables an IMB power supply module ( IMB-ps2,
IMB-dc1, IMB-acc ) is required. This power supply module must be connected between the IMB measur-
ing modules and the IMB-Connection cable :
IMBus
Screws to replace
5
Hide quick links:
Advertisement
Table of Contents
