Available Pc Software - IBR IMB-im2 Instruction Manual

Instruction Manual
9.

Available PC software

IBR_DDK.DLL
For reading measuring values in 32 Bit- Windows applications the IBR_Device Driver Kit =
IBR_DDK.DLL is available for programmers.
The IBR_DDK.DLL offers an API-interface as well as a COM-interface ( ActiveX ) and can be downloaded
without cost from the web side www.IBRit.com.
Features of IBR_DDK.DLL
Parallel operation of up to 8 interfaces ( COM or USB )
Universal interface to all IBR-Interface- and measuring instruments
Examples for VB, VC++ and Delphi
IBR_SimKey
The software IBR_SimKey receives the measuring values in the background and transfers them over the
keyboard buffer to other programmes. This means that each software, which allows measuring data input
by keyboard, can be used for measuring data collection with IBR_SimKey.
IBR_SimKey allows only the measuring data transfer by data key of the gauge. Hand / Foot switches are
not supported in standard IBR_SimKey version.
IBR_VCP
The programme IBR_VCP provides a software interface between IMBus and any application software.
It simulates the COM-Port on a Windows-PC, which can be opened by the application software and simu-
lates the command / measuring data format of other multiplexers on the market ( i.e. IBRit-mc/md,
MUX10, MUX50, Opto-RS232, ... ).
The IBR_VCP software overtakes the communication between IMBus and the application software ( as a
software bridge ).
IBREXDLL ( Data collection of measuring data into MS-Excel )
With the IBREXDLL measured data can be read from all IBR interface- and measuring instruments into
Excel and can be assigned freely to cells in any Excel - workbook.
The measuring values can be collected by data key of the gauge, by function key, by foot / hand switch or
automatically by timer and can be inserted in any EXCEL-table sorted by characteristics.
The expansion module IBREXWGL allows the continuous visualisation of up to 8 measured values as
numeric- and column displays. For each display the unit, the resolution, the nominal size, the upper and
lower tolerance and the column display range can be programmed.
The expansion module IBREXSPC allows the statistical analysis of the collected measuring data with
control charts, run charts, histograms and statistical data in MS-Excel
IMBus
34