IBR IMB-im2 Instruction Manual page 29

Instruction Manual
IMB-ae1 :
( Measuring modules for connection of pneumatic gauge heads )
Air pressure supply of the AE - FC1
Air pressure supply of the IMB-ae1
( filtered air < 5µm, free from water and oil )
IMB-ai1/2/4/8 :
IMB-mi2/4/8 :
IMB-sm1/2/4 :
IMBus
Air pressure supply connection
Outlet of measuring air
Connection of gauge head
Measuring principle
Pneumatic measuring range
Measuring rate
Operation temperature range
Storage temperature range
Type of protection
( Measuring modules for connection of analogue voltages and currents )
Resolution / measuring range
Measuring rate
Operation temperature range
Storage temperature range
( Interface modules for gauges with Mitutoyo Digimatic output )
Connection
Operation temperature range
Storage temperature range
( Universal serial interface module )
Connection
Universal configurable
Operation temperature range
Storage temperature range
29
Quick connector for PU hose 8/6mm
4 - 8 bar / 60 - 120 psi
2,6...2,8 bar / 40 psi
Coupling DN2,7
Nipple DN2,7 for PU hose 6/4 mm
Differential pressure measuring with Piezo sensors
... ±80µm / ... ±0,003inch
1800 Measuring values / sec / channel
0 ... 45 °C
-20 ... 80 °C
IP65 (CEI / IEC 529)
16 Bit
+/- 10,0 V on 0,5 mV ( Standard type )
+/- 2,0 V on 0,1 mV
1800 Measuring values / sec / channel
0 ... 45 °C
-20 ... 80 °C
Gauges with Mitutoyo Digimatic output
0 ... 45 °C
-20 ... 80 °C
Gauges with RS232 output
By loading gauge drivers from IBR library
( Standard : Opto-RS232 )
0 ... 45 °C
-20 ... 80 °C
(depends on the gauge head)