Advertisement
Quick Links
Advertisement
Related Manuals for Kleenmaid CCT6020
Summary of Contents for Kleenmaid CCT6020
- Page 1 cooking collection Instructions for use and warranty details...
- Page 2 Once installation is complete, please read this instruction manual carefully and get to know the controls and the features of your new Kleenmaid appliance. These simple instructions will enable you to achieve excellent results from the very first time you use it.
- Page 3 Your safety is important to us. Please read this information before using your cooktop. • Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on • Connection to a good earth wiring system is essential and mandatory.
- Page 4 • This appliance is to be properly installed and earthed only by a suitably qualified person. • This appliance should be connected to a circuit which incorporates an isolating switch providing full disconnection from the power supply • Failure to install the appliance correctly could invalidate any warranty or liability claims.
- Page 5 • Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot • Keep children away • Handles of saucepans may be hot to touch. Check saucepan handles do not overhang other cooking zones.
- Page 6 • Do not allow children to play with the appliance or sit, stand, or climb on it. • Do not store items of interest to children in cabinets above the appliance. Children climbing on the cooktop could be seriously injured. •...
- Page 7 •This appliance is intended to be used in household and similar applications such as: -staff kitchen areas in shops, offices and other working environments; -farm houses; -by clients in hotels, motels and other residential type environments; -bed and breakfast type environments. •WARNING: The appliance and its accessible parts become hot during use.
- Page 8 •WARNING: Danger of fire: do not store items on the cooking surfaces. •W f the surface is cracked, switch off the appliance to avoid the possibility of electric shock •A steam cleaner is not to be used. •The appliance is not intended to be operated by means of an external timer or separate remote-control system.
- Page 9 on the purchase of your new Ceramic We recommend that you time to read this Manual in order to fully understand how to install and operate . For installation, please read the installation section. Read all the safety instructions carefully before use and keep this Manual for future reference.
- Page 10 • Read this guide, taking special note of the ‘Safety Warnings’ section. • Remove any protective film that may still be on your ceramic • The controls respond to touch, so you don’t need to apply any pressure. • Use the ball of your finger, not its tip. •...
- Page 11 Always lift pans off the ceramic hob – do not slide, or they may scratch the glass. • After power on, the buzzer beeps once, all the indicators light up for 1 second then go out, indicating that the ceramic hob has entered the state of standby mode.
- Page 12 • You can modify the heat setting at any time during cooking. • By holding down either of these buttons, the value will adjust up or down. 1. Touch the heating zone selection control that you wish to switch off 3.
- Page 13 • You can lock the controls to prevent unintended use (for example children accidentally turning the cooking zones on). • When the controls are locked, all the controls except the ON/OFF control are disabled. Touch the control. The timer indicator will show “ Lo “ Make sure the ceramic hob is turned on.
- Page 14 You can use the timer in two different ways: 1. Make sure the cooktop is turned on. Note: you can use the minute minder even if you’re not selecting any cooking zones. 2. Touch the timer control, the timer indicator show “--” 3.
- Page 15 When the time is set, it will begin to count down immediately. The display will show the remaining time and the timer indicator will flash for 5 seconds. Buzzer will beep for 30 seconds and the timer indicator shows “- - “ when the set time 1.
- Page 16 If the setting time exceeds 99 minutes, the timer will automatically return to 0 minute. 4. Touching the heating zone selection control, and then touch the ‘Timer’, the timer is cancelled, and the”--“ will show in the minute display. 5. When the time is set, it will begin to count down immediately.
- Page 17 2. When cooking timer expires, the corresponding cooking zone will switch off automatically. NOTE: If you want to change the time after the timer is set, from step 1 • When food comes to the boil, reduce the power setting. •...
- Page 18 4. Turn the steak only once during cooking. The exact cooking time will depend on the thickness of the steak and how cooked you want it. Times may vary from about 2 – 8 minutes per side. Press the steak to gauge how cooked it is –...
- Page 19 Everyday soiling on glass 1. Switch the power to the • When the power to the cooktop is (fingerprints, marks, cooktop off. switched off, there will be no ‘hot stains left by food or 2. Apply a cooktop cleaner surface’ indication but the non-sugary spillovers on while the glass is still warm cooking zone may still be hot!
- Page 20 This is normal for cookware and crackling or clicking construction of your cookware does not indicate a fault. noises. (layers of different metals vibrating differently). Cooking Hob CCT6020 Cooking Zones 4 Zones Supply Voltage 220-240V~ Electric Power 5490-6533W Product Size ×H(mm)
- Page 21 Cut out the work surface according to the sizes shown in the drawing. For the purpose of installation and use, a minimum of 50mm space shall be preserved around the hole. Be sure the thickness of the work surface is at least 30mm. Please select heat-resistant work surface material to avoid deformation caused by the heat radiation from the hotplate.
- Page 22 The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the controls protruding from the hob. Adjust the bracket position to suit for different work surface’s thickness.
- Page 23 The ceramic cook not be mounted to cooling equipment, dishwashers rotary dryers. The ceramic cook shall be installed such that heat radiation can be ensured to enhance its reliability. The wall and induced heating zone above the work surface To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
- Page 24 If the appliance is being connected directly to the mains supply, an omnipolar circuit breaker must be installed with a minimum gap of 3mm between the contacts. The installer must ensure that the correct electrical connection has been made and that it complies with safety regulations. The cable must not be bent or compressed.
- Page 25 This page intentionally left blank.
- Page 26 ’s ’s ’ Product ceases to carry the original manufacturer’s serial number or is sold at an auction;...
- Page 27 Replacement items are “ for like” and is not “new for old” and does not indicate in any way that a faulty Product will be “Like for like” may eithe ‘ ’ Competition and Consumer Act 2010 http://www.kleenmaid-appliances.com.au/support/your-kleenmaid-warranty...
- Page 28 Other products available in the Kleenmaid range of appliances Washing machines Clothes dryers Dishwashers Ovens Cooktops Steam ovens Microwave ovens Built in espresso coffee machines Rangehoods Freestanding ovens Compass Capital Services Pty Limited trading as Kleenmaid ABN 96138214525 Level 2, 204 Botany Road Alexandria...
Need help?
Do you have a question about the CCT6020 and is the answer not in the manual?
Questions and answers