PB TEEN LOUNGEABOUT DAYBED Quick Start Manual

Advertisement

LOUNGEABOUT DAYBED

PARTS INCLUDED:

(A) Top Panel – 1pc
(B) Bottom Panel – 1pc
(C) Post – 4pcs
(D) Post with Chute – 2pcs
(E) Divider with Chute – 1pc
(F) Divider

TOOLS REQUIRED:

Philips Screwdriver(Not included)
HARDWARE LIST:
(G) Allen Key – 1x
(J) Flat Washer (1/4") – 18x

PRE-ASSEMBLY:

For your safety and ease, assembly by two adults is recommended.
Please read all instructions before beginning assembly. The illustrations provided allow for easier assembly when
used in conjunction with the assembly instructions.
Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface. The shipping box
provides an ideal work surface. Do not dispose of any contents until assembly is completed to avoid accidentally
discarding small parts or hardware.
Use the parts and hardware lists to identify and separate each of the pieces included prior to starting assembly.
Note: DO not fully tighten the bolts until all parts are in place. Failure to follow these instructions may cause the
bolts to misalign during assembly.
Do not use power drill as it may cause cracking.
Date - June 24, 2014
D
(H) Bolt (1/4"x32mm) – 18x
(K) Wood Screw (4x25mm) – 12x
1/3
www.pbteen.com
A
C
F
E
F
B
(I) Spring Washer (1/4") – 18x
C
D

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LOUNGEABOUT DAYBED and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for PB TEEN LOUNGEABOUT DAYBED

  • Page 1 LOUNGEABOUT DAYBED PARTS INCLUDED: (A) Top Panel – 1pc (B) Bottom Panel – 1pc (C) Post – 4pcs (D) Post with Chute – 2pcs (E) Divider with Chute – 1pc (F) Divider TOOLS REQUIRED: Philips Screwdriver(Not included) HARDWARE LIST: (I) Spring Washer (1/4”) – 18x (G) Allen Key –...
  • Page 2 ASSEMBLY INSTRUCTIONS: Slide a Spring Washer (I) and a Flat Washer (J) onto each Bolt (H). Attach Post (C) to each corner of the Bottom Panel (B). Insert the bolts with washers from bottom of Bottom Panel (B) into each Post (C) and tighten with Allen Key (G).
  • Page 3 Turn the assembled piece upright. Align and place Top Panel (A) onto the assembled piece. Insert the remaining (9x) bolts with washers from Top Panel (A) into each Post and tighten with Allen Key (G). Use the remaining (6x) Wood Screws (K) to secure the Top Panel to Dividers. Check alignments and tighten all connecting bolts.

Table of Contents