Song Position - Yamaha TYROS Owner's Manual

Song Position

The TYROS provides the following song position features.
• The current song position is indicated on the Main display as measure/beat number during playback — letting you easily see where
you are in the song.
• Pressing the [FF] or [REW] button automatically calls up a pop-up window showing the current measure number (or Phrase Mark
number) in the Main display.
Indicates the current measure
in song playback.
• You can put Song Position markers in the song data using the [SP1] - [SP4] buttons (page 44). This not only lets you navigate quickly
and easily through a song, but also lets you set up convenient playback loops.
I Song Position Marker
This section covers two additional Marker-related features and details. For basic information on using the Markers for
jump playback and loop playback, refer to page 44 in the Quick Guide.
G Jump Markers
The Markers explained in the Quick Guide on page 44 are also called "Jump Markers." They can be set in the song data by pressing
the [SP1] - [SP4] buttons. In the Event List display of the Song Creator (page 106), they are indicated as "SPJ-01" - "SPJ-04." In the
Event List, they can be moved freely to other positions and can even copied to create identical Marker numbers at other positions. When
the same Marker number is contained at different locations in the song, the latest occuring one is used as an Loop End Marker (below).
G Loop End Marker
Loop End Markers can be used for putting additional Markers in song data, providing even greater versatility. Creating a Loop End
Marker is done within the Event List (and not with the [SP1] - [SP4] buttons on the panel), by simply copying one "SPJ" Jump Marker
event to another position in the song.
For basic information on loop playback between successive Jump Markers, refer to page 44 in the Quick Guide.
The examples below show how Loop End Markers can be used in song playback.
Copied within
the Event List
Top of the
song
[SPJ-01]
If the song is playing back between the two SPJ-01 points, turning on [LOOP] will result in a playback
loop between those points.
If the song is playing back between the second SPJ-01 and SPJ-02 and [LOOP] is turned on, playback
jumps back to the first SPJ-01 and loops between two SPJ-01 points.
Copied within
the Event List
Top of the
song
[SPJ-01]
If the [LOOP] button is turned on while the song is playing back between the top
of the song and SPJ-02, playback will loop between SPJ-01 and SPJ-02.
In the examples above, the actual data of the Loop End Marker is identical to the event it was copied from — only the location of the
copied Marker provides it with this different function.
In song playback, the markers formatted as "SPJ-xxxxx" (xxxxx: any character except 01 - 04 and any number of letters is OK) are
handled as Loop End Markers. Since the Event List in the Song Creator function does not let you freely name Markers, the instructions
above are recommended for creating new Markers. However, with sequence software on a computer, you can create new Markers and
assign appropriate names to them. By naming Markers in this way, you can easily distinguish between Loop End Markers and Jump
Markers in the Event List.
.....................................................................................................................................
Copied event becomes
Loop End Marker
[SPJ-01] [SPJ-02] [SPJ-03]
Copied event becomes Loop
End Marker
[SPJ-02] [SPJ-01] [SPJ-03]
If the song is playing back between SPJ-02 and the second SPJ-01, turning on
[LOOP] will result in a playback loop between those points.
If the song is playing back between the second SPJ-01 and SPJ-03 and
[LOOP] is turned on, playback jumps back to SPJ-02 and loops between SPJ-
02 and the second SPJ-01 (Loop End Marker).
This menu appears only when the song data contains
Phrase Marks.
This determines which is used for song position, Bar
(measure) or Phrase Mark. When this is set to
"PHRASE MARK," you can use the [FF] or [REW] but-
tons to navigate through the Phrase Marks in the song.
End of the
song
[SPJ-04]
End of the
song
[SPJ-04]
Reference
Song Playback
• Loop playback problems may occur if
successive Markers are too close to
one another.
• When the effect settings of the jump
destination (the position you're jump-
ing to) differ from those at the jump
source, glitches or drop-outs in the
sound may result. This is because of
limitations in the effect processors of
the TYROS.
• When using the Guide function (the
[GUIDE] lamp is on) with jump play-
back, keep in mind that the Guide
indication may not be able to stay in
time with the jumps.
TYROS Owner's Manual
91