Editing Data For Each Channel; Making Style File Format Settings - Yamaha TYROS Owner's Manual

Reference
Style Creator (Digital Recording)

Editing Data for each Channel

The explanations here apply when you call up the CHANNEL page in step #4 of the Basic Procedure on page 116.
1
Use these to select
the desired edit
operation.
4
Executes the selected operation on
the respective page. After the opera-
tion is completed, you can hear the
result and this button changes to
[UNDO], letting you restore the origi-
nal data if you're not satisfied with
the result of each operation. The
Undo function only has one level;
only the previous operation can be
undone.
QUANTIZE
VELOCITY CHANGE
BAR COPY
BAR CLEAR
REMOVE EVENT

Making Style File Format Settings

The explanations here apply when you call up the PARAMETER page in step #4 of the Basic
Procedure on page 116. This display provides a variety of style controls — such as determining
how the pitch and sound of the recorded style change when playing the chords in the left-hand
range of the keyboard. Parameter settings on this display are available only when any of the non-
rhythm parts are set to "REC" on the RECORD pop-up window on the BASIC page. For details
about the relationship between the parameters, refer to "Style File Format" on page 115.
1
Use these to
select the
desired edit
operation.
2 Select the desired
channel (part) to be
edited.
120
TYROS Owner's Manual
2 Select a channel
(part) of which data
edit is to be executed.
Same as in the Song Creator. See page 96.
Boosts or cuts the velocity of all notes in the specified channel, according to the
percentage specified here.
This function allows data to be copied from one measure or group of measures to
another location within the specified channel. SOURCE specifies the first (TOP)
and last (LAST) measures in the region to be copied. DEST specifies the first mea-
sure of the destination location, to which the data is to be copied.
This function clears all data from the specified range of measures within the select-
ed channel.
This function lets you remove specific events from the selected channel.
3 Set the parameters
of the channel
specified at left.
3 Set the parameters
for executing the
data edit.
4
After you've finished creat-
ing/editing a style, make
sure to execute the Save
operation. The recorded
style will be lost if you
change to another style or
you turn the power off with-
out executing the save
operation (page 69).
5
After you've finished creat-
ing/editing a style, make
sure to execute the Save
operation. The recorded
style will be lost if you
change to another style or
you turn the power off with-
out executing the save
operation (page 69).
• When NTR is set to "Root Fixed "
and NTT is set to "Bypass, " the
"Source Root " and "Source
Chord " parameters are changed
to "Play Root " and "Play Chord, "
respectively. In this case, you can
change chords and hear the
resulting sound for all channels.
• Normally in the Style Creator, you
can hear your original style-in-pro-
cess with the Source Pattern.
However, there is a way to hear it
played by a specific chord and
root. To do this, set NTR to "Root
Fixed" and NTT to "Bypass," then
change the newly displayed "Play
Root" and "Play Chord" parame-
ters to the desired settings.