Registration Memory; Freeze; Registration Sequence - Yamaha TYROS Owner's Manual

Reference

Registration Memory

Basic instructions on using the Registration Memory are explained in the "Quick Guide." This section gives detailed
information on the Freeze and Registration Sequence functions not covered in the "Quick Guide."
I About User Voices and Registration Memory
When you memorize a panel setup to Registration Memory that uses a User voice (on the User or Disk drive), keep in mind
that the actual User voice is not memorized to Registration Memory — only its settings are.
Registration Memory saves and recognizes a User voice as:
• The preset voice on which the User voice is based
• The parameter settings made in Sound Creator
Selecting a Registration Memory number with User voice calls up the two above, and not the User voice on the drive. This
means that the actual User voice could be changed or even deleted from the drive, and yet still be available in Registration
Memory.

Freeze

This section briefly covers details on the Freeze function. For basic instructions on Freeze, refer to the "Quick Guide."
1
Call up the Registration Freeze display via [FUNCTION] → FREEZE and
select the parameter group to be "frozen" or unchanged.
MENU
SOUN
FUNCTION
CREA
2
Turn the [FREEZE] button on.
3
You can check whether your Freeze settings are correct or not by chang-
ing the Registration Memory number.

Registration Sequence

As convenient as the Registration Memory buttons are, there may be times during a performance when you want to quickly switch
between settings — without having to take your hands from the keyboard. The convenient Registration Sequence function lets
you call up the presets in any order you specify, by simply using the [BACK]/[NEXT] buttons or the pedal as you play.
FREEZE
Two functions – changing a Bank according to the order listed on the Open/
Save display and changing the Memory number according to the order deter-
mined from the Registration Sequence display – can be assigned to the
[BACK]/[NEXT] button and the foot pedal connected to the TYROS.
1
Select a Registration Memory bank of which the sequence is programmed.
2
Call up the Registration Sequence display via [FUNCTION] → REGISTRATION
SEQUENCE.
128
TYROS Owner's Manual
Quick Guide on page 51
.......................................................................................
Select a parameter group
to be set.
These enter and remove checkmarks from the parame-
ter groups. If you want a parameter group to remain
unchanged even when changing Registration Memory
numbers, enter a checkmark to the appropriate box.
REGISTRATION MEMORY
Quick Guide on page 53
Settings in the Registration
Freeze display are automati-
cally saved to Flash ROM when
you exit from the display. How-
ever, if you turn the power off
without exiting from this dis-
play, the settings will be lost.
• The settings on the Registration
Freeze display can be saved to
the User or Disk drive on the
[FUNCTION] → UTILITY → SYS-
TEM SETUP display as a System
Setup file (page 65).
FREEZE
BACK NEXT