Remove Failed Fan; Install New Fan - Fujitsu ETERNUS AB Series Hardware Maintenance Manual

Attention: Always use two hands to support the weight of a controller canister.
7. Place the controller canister on a flat, static-free surface.
What to do next
Go to Remove failed

Remove failed fan

You remove a failed fan so you can replace it with a new one.
Before you begin
• You have an ESD wristband, or you have taken other antistatic precautions.
Procedure
Gently lift the failed fan from the controller.
What to do next
Go to Install new fan.

Install new fan

You install a new fan to replace the failed one.
fan.
| Fans |
38