Rear Panel - Yamaha S03 Owner's Manual

Rear Panel

THRU
1 MIDI IN/OUT/THRU terminals (Page 12)
MIDI IN receives MIDI messages from an external
MIDI device. Use this connector to control the S03
from an external MIDI device. MIDI OUT sends
out MIDI messages generated by the S03 (including
notes played on the keyboard and panel control
movements) to an external MIDI sound module or
device. MIDI THRU simply relays the MIDI
messages received at MIDI IN. Connect other
devices here.
2 HOST SELECT switch (Page 12)
For selecting the type of computer connected to the
S03 via the TO HOST connector. When using the
MIDI IN/OUT/THRU terminals, set this switch to
MIDI.
3 TO HOST terminal (Page 13)
For connection to a computer, using an optional
serial computer cable.
4 FOOT SWITCH jack (Pages 14, 46)
For connecting an optional footswitch (FC4 or
FC5). Depending on the assigned function, you can
use the footswitch to turn specific functions on and
off.
10
MIDI HOST SELECT
OUT IN PC-2 Mac TO HOST
MIDI OFF
1 2 3
FOOT FOOT STANDBY
SWITCH CONTROLLER ON DC IN R
4 5 6 7
5 FOOT CONTROLLER jack (Pages 14, 45)
For connecting an optional foot controller (FC7,
etc.). This gives you real-time control over various
aspects of the sound, such as tone, pitch, and
volume.
6 STANDBY/ON switch (Page 15)
Use this to turn the S03 on or off.
Even when the switch is in the "STANDBY" position,
electricity is still flowing to the instrument at a minimum
level. When not using the S03 for an extended period of
time, be sure to unplug the AC power adaptor from the
wall AC outlet.
7 DC IN terminal (Page 11)
For connecting an appropriate AC power adaptor
(PA-3B or an equivalent recommended by Yamaha)
to supply power to the S03.
8 OUTPUT L/MONO and R jack (Page 11)
Line level audio signals are output from the S03 via
these phone jacks (1/4" mono phone plug). For
monophonic output, use just the L/MONO jack.
9 PHONES jack (Page 11)
For connection to a pair of stereo headphones.
OUTPUT
L MONO PHONES
8 9