Before Use; Power Supply; Connections - Yamaha S03 Owner's Manual

This section explains how to connect to an AC power source, audio and MIDI devices, and a computer system. Only
switch the S03 on after you have made all the necessary connections. We strongly recommended you read this
section BEFORE using the S03.

Power Supply

STANDBY OUTPUT
ON DC IN R L MONO
DC IN
1 Make sure that the S03's STANDBY/ON switch is
at the STANDBY (off) position.
2 Connect the PA-3B's DC plug to the S03's DC IN
terminal on the instrument's rear panel.
3 Connect the adaptor's AC plug to the nearest
electrical outlet.
Do not attempt to use an AC adaptor other than the
Yamaha PA-3B or an equivalent recommended by
Yamaha. The use of an incompatible adaptor may cause
irreparable damage to the S03, and may even pose a
serious shock hazard! ALWAYS UNPLUG THE AC
ADAPTOR FROM THE AC POWER OUTLET WHEN
THE S03 IS NOT IN USE.
Even when the switch is in the "STANDBY" position,
electricity is still flowing to the instrument at a minimum
level. When not using the S03 for an extended period of
time, be sure to unplug the AC power adaptor from the
wall AC outlet.

Before Use

S03 Rear Panel
PHONES
To electrical
outlet

Connections

Connecting to External
Audio Equipment
Since the S03 has no built-in speakers, you need to
monitor its sound output via external audio
equipment. Alternatively, you could use a pair of
headphones.
There are several methods of connecting to external
audio equipment, as described in the following
illustrations.
Connecting Stereo Powered
Speakers
A pair of powered speakers can accurately produce the
S03's rich sounds with their own pan and effect
settings. Connect your powered speakers to the
OUTPUT L/MONO and R jacks on the rear panel.
Powered speaker
(Left)
INPUT INPUT
OUTPUT L / OUTPUT R
MONO
S03
n When using just one powered speaker, connect it to the
OUTPUT L/MONO jack on the rear panel.
Powered speaker
(Right)
Stereo headphones
PHONES
11