Yamaha S03 Owner's Manual page 94

3. Rcv Ch
(Voice Mode MIDI Receive Channel)
Set the MIDI Receive channel for using the S03 (in the
Voice mode) with an external sequencer, computer and
so on, and for using it as a MIDI tone generator.
PAGE PART ELEM KEY
3
OCTAVE
❏
Settings: 1 ~ 16, omni (all channels)
n For information on setting the MIDI Receive channel for
each Part in the Multi mode, see page 61.
4. Trans Ch (MIDI Transmit Channel)
Set the MIDI Transmit channel for transmitting MIDI
from the keyboard, controllers and so on.
PAGE PART ELEM KEY
4
OCTAVE
❏
Settings: 1 ~ 16
5-1. RxPgmChng
(Receive Program Change On/Off)
5-2. RxBankSel
(Receive Bank Select On/Off)
Set to enable or disable reception of Program Change/
Bank Select messages between the S03 and an external
MIDI device.
PAGE PART ELEM KEY
5
OCTAVE
❏
Settings: off (disable), on (enable)
94
MIDI Channel/MIDI Filter
PAGE PART ELEM KEY
5
OCTAVE
6-1. TxPgmChng
(Transmit Program Change On/Off)
6-2. TxBankSel
(Transmit Bank Select On/Off)
Determines whether Program Change/Bank Select
messages executed from the S03's panel are
transmitted via MIDI or not. Set this to "on" when
you want to change programs on a connected MIDI
device.
PAGE PART ELEM KEY
6
OCTAVE
❏
Settings: off (disable), on (enable)
7. Thru Port
You can connect the S03 to a computer via a dedicated
serial cable on the TO HOST connector. In this
situation, MIDI messages received via the TO HOST
connector can be passed through the MIDI OUT
connector of the S03 to other connected devices. Set
the port number here.
PAGE PART ELEM KEY
7
OCTAVE
❏
Settings: 1 ~ 8
PAGE PART ELEM KEY
6
OCTAVE