Utility Job; Factory Set (Restore Factory Defaults) - Yamaha S03 Owner's Manual

7. AC1 CC No
(AC1 Control Change Number)
In the Voice mode, this determines which Control
Change number is assigned to the AC1 (Assignable
Controller 1).
PAGE PART ELEM KEY
7
OCTAVE
❏
Settings: 0~95
n For details about Assignable Controller 1, see page 66.
n The AC1 CC No parameter in the Multi mode is set in
the Multi Part Edit mode (page 66).
8. V EfBypass (Voice Effect Bypass)
This determines whether or not effects in the Voice
Mode can be bypassed. Only System effects can be
bypassed.
PAGE PART ELEM KEY
8
OCTAVE
❏
Settings: off (not bypassed), on
92
Controller/Effect

Utility Job

In the Utility Job mode, you can restore your
synthesizer's factory default settings of the S03
(Factory Set).
Factory Set (Restore
Factory Defaults)
This lets you restore the synthesizer's default Internal
Voices (User Memory) and Multis, as well as its System
and other settings.
Once you edit any settings, the corresponding factory
defaults will be overwritten and lost.
Use the procedure below to restore the factory default
settings.
When you restore the factory default settings, all the
current settings for the all the Multis and User Voices
will be overwritten with the factory defaults. Make sure
you are not overwriting any important data. You should
back up any important data to your computer or to some
external device beforehand.
1Press the [JOB] button in Utility Mode. The Factory
Set display appears.
MODE
MULTI VOICE DEMO
UTILITY MIDI
EDIT JOB STORE
COMPARE
2Press the [ENTER] button. A confirmation message
appears.
3Press the [INC/YES] button to execute the Factory
Set job. After the job has been completed, a
"Completed!" message appears. To cancel a job
while it is being executed, press the [DEC/NO]
button.
4Press the [EXIT] button to return to the Utility
mode.
PAGE PART ELEM KEY
1
OCTAVE