Powering Up - Yamaha S03 Owner's Manual

Powering Up

Power-on Procedure
When you have made all the necessary connections
between your S03 and any other devices, make sure
that all volume settings are turned down all the way to
zero. Then turn on every device in your setup in the
order of MIDI masters (senders), MIDI slaves
(receivers), then the audio equipment (mixers,
amplifiers, speakers, etc.). This ensures smooth MIDI
operation and prevents speaker damage.
When powering down the setup, first turn down the
volume for each audio device, then switch off each
device in the reverse order (first audio devices, then
MIDI).
When using the S03 as MIDI slave:
MIDI master (transmitting device)
POWER
ON!!
S03 as MIDI slave (MIDI receiving device)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 L R
Audio equipment (first mixer, then amplifier)
Turning on the S03
In order to avoid possible damage to the speakers or other
connected electronic equipment, always switch on the
power of the S03 before switching on the power of the
amplified speakers or mixer and amplifier. Likewise,
always switch off the power of the S03 after switching off
the power of the amplified speakers or mixer and
amplifier.
Even when the switch is in the "STANDBY" position,
electricity is still flowing to the instrument at a minimum
level. When not using the S03 for an extended period of
time, be sure to unplug the AC power adaptor from the
wall AC outlet.
n Before you switch your S03 on or off, first turn down the
volume of any connected audio equipment.
1 Press the STANDBY/ON switch
FOOT STANDBY
ON DC IN
H CONTROLLER
2 A splash screen ("Welcome to S03") is displayed
briefly.
3 The Multi or Voice Play Mode screen appears next.
PAGE PART ELEM KEY
OCTAVE
4 Turn up the amplifier's volume as necessary.
5 Adjust the S03's [VOLUME] slider to set an
appropriate volume level.
OUTPUT
R L MONO PHONES
VOLUME
15