Recording - Yamaha RM1x Owner's Manual

Sequence remixer
Hide thumbs Also See for RM1x:
Table of Contents

Advertisement

2. Recording

You use SONG RECORDING mode to record your songs.
You start a recording session from the SONG PLAY screen by pressing the REC button. This puts you into Recording Standby.
You can then select the recording method and set the relevant parameters, before beginning the actual recording.
Refer to the PATTERN mode recording instructions (page 49) for details on recording using the REPLACE, OVERDUB,
STEP, and GRID recording modes. The SONG mode additionally allows PUNCH-IN recording, which will be described
below.
Track number
Parameter
Track Type
Recording type
Keypad velocity
BPM
Track number
Transpose
Measure
Time Signature
Track status
* For information about how to change values, refer to the Basic Operation (page26).
Values
Single, Multi
Replace (Realtime)
Overdub (Realtime)
Punch In (Realtime)
Step (Step)
Grid (Step)
001 ... 127, RND1 ... RND4
25 ... 300
01 ... 16
-36 ... +36
1/16 ... 16/16; 1/8 ... 16/8; 1/4 ... 8/4 Sets the song's time signature.
MUTE, SOLO
Transpose
Function
Specifies SINGLE or MULTI-TRACK recording. When SINGLE is
selected only a single track is recorded at a time as in the PATTERN
mode. When MULTI is selected all 16 tracks can be recorded at the
same time via the corresponding MIDI channels. Please note that
only the REPLACE, OVERDUB, and PUNCH-IN recording modes
are available when MULTI is selected.
Selects the recording method.
Specifies the note velocity value for the RM1x keyboard. Higher val-
ues produce louder sound.
Sets tempo for song playback.
Shows the current selected track number. Track number selection
can be accomplished via this parameter, or by the keyboard method
described on page 27.
Shows the current transpose value. Transposition can be accom-
plished via this parameter, or by the keyboard method described on
page 27.
Sets recording start location; or shows current recording location.
Indicates track SOLO or track MUTE.
The highlighted track number indicates the currently selected track.

2. Recording

Measure
Track status
Time signature
117
RM1x SEQUENCE REMIXER

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents