Job - Yamaha RM1x Owner's Manual

12. Job

12. Job
You use the RM1x's pattern jobs to perform various operations on phrases and patterns.
You select the job from the job list using the Display Knob 1, 2 or the CURSOR buttons. You can also make your selection
using the F4 button.
Job List
Category
UNDO/REDO 00 Undo/Redo
NOTE 01 Quantize
NOTE 02 Modify Velocity
NOTE 03 Modify Gate Time
NOTE 04 Crescendo
NOTE 05 Transpose
NOTE 06 Glide
NOTE 07 Create Roll
NOTE 08 Chord Sort
NOTE 09 Chord Separate
EVENT 10 Shift Clock
EVENT 11 Copy Event
EVENT 12 Erase Event
EVENT 13 Extract Event
EVENT 14 Create Continuous Data
EVENT 15 Thin Out
EVENT 16 Modify Control Data
EVENT 17 Time Stretch
PHRASE 18 Copy Phrase
PHRASE 19 Exchange Phrase
PHRASE 20 Mix Phrase
PHRASE 21 Append Phrase
PHRASE 22 Split Phrase
PHRASE 23 Get Phrase
PHRASE 24 Put Phrase
PHRASE 25 Clear Phrase
PHRASE 26 Phrase Name
TRACK 27 Copy Track
TRACK 28 Exchange Track
TRACK 29 Clear Track
TRACK 30 Normalize Play Effect
TRACK 31 Divide Drum Track
PATTERN 32 Copy Pattern
PATTERN 33 Append Pattern
PATTERN 34 Split Pattern
PATTERN 35 Clear Pattern
PATTERN 36 Style Name
80
RM1x SEQUENCE REMIXER
Values
If UNDO: Cancel the last operation. If REDO: Cancel the last UNDO
Quantize note events within selected segment of selected user phrase.
Change velocities in selected segment of selected user phrase.
Change gate times in selected segment of selected user phrase.
Gradually increase/decrease velocity over selected segment.
Transpose all notes over selected segment.
Produces smooth glides from note to note in the selected segment.
Inserts repeated note data in the specified segment to create rapid rolls.
Sort each chordal note event (within specified segment) by pitch.
Break each chordal note event (within specified segment) into individual
notes, separated by designated delay time.
Shift all data (within specified segment) by specified number of clock cycles.
Copy all events in specified segment to designated destination.
Erase all events over selected segment (and replaces with rests).
Move events of specified type from specified segment of one phrase to same
segment in another.
Creates the specified type of continuous control change data in the specified
segment.
Reduce repetitions of specified event type (within specified segment).
Changes of offsets the values of all occurences of the specified type of
control change data with the specified segment.
Expand or compress timing over specified segment.
Copy phrase into specified destination.
Exchanges the contents of two specified phrases.
Mix one phrase into another.
Append one phrase to another.
Split phrase into two phrases.
Create user phrase from selected song data.
Copy user phrase into song.
Delete all data from user phrase.
Assign name to user phrase.
Copies the data from one specified track to a second specified track.
Exchanges the contents of two specified tracks.
Delete all data from selected track, cancel voice setting, and reinitialize play
effects.
Actually applies the PLAY FX and GRID GROOVE settings to the sequence
data, overwriting the existing sequence data.
Separates the note events in a specified track and places the notes corre-
sponding to different drum instruments in separate tracks.
Copy data from selected pattern track into destination pattern track.
Append one pattern to another.
Split pattern into two patterns.
Delete all data from selected pattern.
Assign a name to the selected style.
Function page
82
82
84
85
86
87
87
88
88
89
89
89
90
90
91
91
92
92
92
93
93
93
94
94
95
95
95
95
96
96
96
97
97
97
98
98
98