Arpeggio - Yamaha RM1x Owner's Manual

6. Arpeggio

6. Arpeggio
This submode can be used to create simple automatic arpeggios based on notes played on the RM1x keyboard.
Arpeggio Setting
Parameter
Type
Sort
Hold
Octave range
Track number
Transpose
* For information about how to change values, refer to the Basic Operation (page26).
62
RM1x SEQUENCE REMIXER
Track number
Values
OFF, UP, DOWN, ALTER1,
ALTER2, RANDOM
ON, OFF
ON, OFF
1 ... 4
01 ... 16
-36 ... +36
Function
Specifies the arpeggio type.
Normally the arpeggio will play based on the order in which the
keys are pressed. But when the SORT parameter (below) is "ON,"
the arpeggio will play according to the selected TYPE regardless of
the order in which the keys are pressed.
"UP" produces an ascending arpeggio. "DOWN" produces a descend-
ing arpeggio. "ALTER1" and "ALTER2" produce different types of
alternating arpeggio. And "RANDOM" produces a random arpeg-
gio.
Determines whether the arpeggio notes will or will not be "sorted"
according to the selected arpeggio TYPE (above).
Determines whether the arpeggio will continue to play when the
notes are released or not.
When this parameter is "ON," the arpeggio will continue to play when
the notes played on the RM1x keyboard or an external keyboard
are released. When "OFF" the arpeggio will stop as soon as the
notes are released.
Specifies the range of octaves the arpeggio will cover. When set to
"1," the arpeggio will include only the notes played on the keyboard.
When set to "2," "3," or "4," the arpeggio will be automatically ex-
tended to cover the specified number of octaves.
Shows the current selected track number. Track number selection
can be accomplished via this parameter, or by the keyboard method
described on page 27.
Shows the current transpose value. Transposition can be accom-
plished via this parameter, or by the keyboard method described on
page 27.
Transpose