Song Playback - Yamaha RM1x Owner's Manual

Sequence remixer
Hide thumbs Also See for RM1x:
Table of Contents

Advertisement

1. SONG Playback

1. SONG Playback

Track number
Parameter
Song number / name
Jump
Keypad velocity
BPM
Track number
Transpose
Measure
Time Signature
Track status
* For information about how to change values, refer to the Basic Operation (page26).
To select and play a song
1 Make sure the SONG mode is selected (if neces-
sary, press the MODE [SONG] button). "SONG"
should appear in the upper left-hand corner of the
LCD display.
2 Use Display Knob 1 to select a song (01 ... 20).
3 Press PLAY
to start playback.
The PLAY
button indicator will flash at the cur-
rent BPM rate, the velocity bars above active tracks
will indicate playback level in the corresponding tracks,
and the MEAS parameter will indicate the current
measure during playback.
116
RM1x SEQUENCE REMIXER
Song name
Values
U01 ... U20
OFF, 001 ...
001 ... 127, RND1 ... RND4
25 ... 300
01 ... 16, BPM
-36 ... +36
1/16 ... 16/16; 1/8 ...
16/8; 1/4 ... 8/4
M, S
Transpose
Function
Selects the song.
Specifies the measure the RM1x will "jump" to when the STOP
button is pressed. When "OFF" the playback locations remains where
it is when playback is stopped.
Specifies the note velocity value for the RM1x keyboard. Higher val-
ues produce louder sound.
Sets tempo for song playback.
Shows the current selected track number. Track number selection
can be accomplished via this parameter, or by the keyboard method
described on page 27.
Shows the current transpose value. Transposition can be accom-
plished via this parameter, or by the keyboard method described on
page 27.
Sets playback start location; or shows current playback location.
Sets the song's time signature.
Indicates track SOLO or track MUTE.
The highlighted track number indicates the currently selected track.
4 Select tracks via the keyboard as described on page
27, and use the realtime controller knobs to change
parameters as required during playback.
In the SONG mode playback will stop automatically
when the end of the song is reached.
5 Press STOP
if you want to stop playback before
the end of the song.
Measure
Track status
Time signature

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents