Yamaha RM1x Owner's Manual page 124

12. Job
Parameter
Category
Job
Select
To Select a Job
Same as in the PATTERN mode. Refer to page 81.
CAUTION !
Do not turn off the power while a job is executing (while the "Executing..." message is on the screen), as this may cause
destruction of your recorded data.
Undo/Redo
Job 00 Undo/Redo
Same as in the PATTERN mode. Refer to page 82.
Note
Job 01 Quantize
Essentially the same as in the PATTERN mode except that a
TRACK is selected rather than a PHRASE, and the selectable
measure range is greater. Refer to page 82.
124
RM1x SEQUENCE REMIXER
Values
UNDO/REDO, NOTE, EVENT,
MEASURE, TRACK, SONG
00 ... 28
Function
Selects the category.
Selects the job.
Jumps to the job currently selected in the job list.
Job 02 Modify Velocity
Essentially the same as in the PATTERN mode except that a
TRACK is selected rather than a PHRASE, and the selectable
measure range is greater. Refer to page 84.
Job 03 Modify Gate Time
Essentially the same as in the PATTERN mode except that a
TRACK is selected rather than a PHRASE, and the selectable
measure range is greater. Refer to page 85.