Command Password - Liebert APM 150 User Manual

46 Chapter 5 Operating Instructions
3. Use the F3 or F4 (up or down) key to select the Date & time option, then press the F5 (enter) key.
4. Move the cursor to the row in which the date and time are displayed, then press the F5 (enter) key.
5. Use the F3 or F4 (up or down) key to enter the current time and date information.
6. Press the F5 (enter) key to save the settings, then press the F2 (ESC) key to return to the OutPut menu.

5.13 Command Password

Password protection is used to limit the control functions accessible to the operator. This password provides
access to UPS and battery test functions.
Liebert APM 150 Integrated UPS Single Module And Parallel System
User Manual