Filter - Yamaha PortaTone PSR-7000 Owner's Manual

Custom Voice Edit

FILTER

.....................................................................................................................................................................................................
The
set the filter envelope
eters. Use the
the corresponding group of parameters.
RATE
Set the rate of cutoff frequency variation. Higher
values produce faster variation.
: Sets the speed of variation from key-on
(BRILLIANCE LEVEL) to the level set by the
ATTACK LEVEL parameter.
,
tion between the attack level and the levels set by
the
rameters, respectively.
: Sets the rate of variation from the level at
key-release to the level set by the
parameter when SUSTAIN is off.
: Sets the rate of variation from the level
set by the
LEVEL
These parameters set the amount of variation
from the preset cutoff frequency. Level "0" is the
preset value.
: Sets the attack level after key-on.
,
,
,
and
release when SUSTAIN is off.
: Sets the level after
tion after key-release when SUSTAIN is on.
KEY ON
92
LCD dials are used to
and
or LCD button to select
, : Set the speed of varia-
, , and
parameter to that set
, : Set the levels after
, and variation.
: Set the levels after
variation after key-
: Sets the brilliance level.
ATACK
DECAY1 RATE DECAY2 RATE
RATE
param-
by the
pa-
is off.
: Sets the rate of variation from the level at key-
release to the level set by the
eter when SUSTAIN is on.
frequency (resonance).
NOTES
• If DRUM kit is selected , SUSTAIN parameters in the AMPLI-
varia-
TUDE ENVELOPE or FILTER ENVELOPE cannot be changed.
• Some parameter settings may have minimal or no effect with
some voices.
DECAY3 RATE
KEY OFF
parameter when SUSTAIN
: Sets the amount of emphasis at the cutoff
RELEASE1 RATE RELEASE2 RATE
SUSTAIN RATE
* Higher rate values produce faster variation.
param-