Volume & Attack; Name & Rotary Speaker - Yamaha PortaTone PSR-7000 Owner's Manual

VOLUME & ATTACK
To access the VOLUME and ATTACK param-
eters for the ORGAN FLUTE voices, press the
LCD button from the
display.
The control adjusts the overall vol-
ume of the current ORGAN FLUTE voice. The
longer the graphic bar, the greater the volume.
The controls adjust the attack sound of
the current ORGAN FLUTE voice. The
and controls increase or reduce the amount of
attack sound at the corresponding footages. The
longer the graphic bar the greater the attack sound.
The control produces a longer or shorter
decay after the initial attack. The longer the graphic
bar the longer the decay. The
the or attack mode: in the
mode attack will only be applied to the first note in
a chord or group of notes played and held simulta-
neously; in the mode attack will be applied
equally to all notes. The
decreases the length of attack and release on voices
based on the controls. The higher the
value the longer the attack and release.
NAME & ROTARY SPEAKER
To access the NAME and ROTARY SPEAKER
parameters for the ORGAN FLUTE voices, press
the
display.
The controls can be used to enter an
original name for the current ORGAN FLUTE voice.
Voice names can be up to 12 characters long. Use the
< > LCD dials to move the name cursor to the
various character positions, then use the
or LCD dial to select the required character
for each position. The
letters, the LCD dial selects lower-case letters,
and the LCD dial selects numbers and
special characters.
..................................................................................................................................................................
,
control selects
control increases or
...........................................................................................................................................
LCD button from the
,
LCD dial selects capital
Playing the PSR-7000
17