Changing The "L" Split Point - Yamaha PortaTone PSR-7000 Owner's Manual

Yamaha portatone owners manual psr-7000

Table of Contents

Playing the PSR-7000

The PSR-7000 has two programmable split points — one which divides the LEFT and RIGHT/LEAD/ORGAN

FLUTE orchestra parts, and one which divides the auto-accompaniment and manual sections of the keyboard when

AUTO BASS CHORD accompaniment (page 31) is engaged. In the split point displays accessed by the

LCD button described below, and the FUNCTION displays (page 110), the former is indicated by the "L"

marker and the latter by the "A" marker above the graphic keyboard. The current split points are indicated on the

display both by the split markers and the "splits" in the graphic keyboard. We'll look at the ABC ("A") split point

in more detail in "Using the Accompaniment Section", page 31. For now, here's how you can change the "L" split

point via the orchestra part easy-setting displays to suit your own playing requirements.

Select an Orchestra Part Easy Setting Display

Select an orchestra part easy-setting display ei-

ther by turning a part on or off and pressing the

or by pressing the

while holding an orchestra part button that is already

on.

Set the Split Point

The split point can be set in two ways: either use

the

key on the keyboard while holding the

LCD button. The new split point will be

indicated on the graphic keyboard in the LCD.

NOTES

• The "L" split point cannot be set lower than the "A" split

point.

• When the "L" and "A" split points are set at different keys,

the LEFT voice can be played between the "A" and "L" split

points when the AUTO BASS CHORD function on. When

the "L" and "A" split points are set to the same key, the

LEFT voice can be played anywhere to the left of the "L"

and "A" split points.

Return to the Previous Display

When Done .......................................

Press the

button to return to the previous display when done.