Dsp Effect Parameter Edit; Dsp Effect Depth - Yamaha PortaTone PSR-7000 Owner's Manual

DSP EFFECT PARAMETER EDIT

When the
selected as described above, the
LCD button will appear, pressing this button gives
you access to the individual DSP effect parameters
for the currently selected DSP type. Use the LCD
dial below the number corresponding to the param-
eter you want to edit. Press the
return to the
done. See "THE DSP EFFECTS AND PARAM-
ETERS", below for a list of the effects and their
parameters.
The LCD dial lets you determine
whether the preset DSP EFFECT type and depth
settings for the LEAD or RIGHT 1 voice will be
selected whenever a voice is selected, or whether the
settings you make in this display affect all voices.
Select or
EFFECT settings for those voices, or
use your own settings for all voices.

DSP EFFECT DEPTH

Independently sets the depth of the selected DSP
effect for the microphone, multi pads, accompani-
ment, left voice, right 1 voice, right 2 voice, and lead
voice
If the
showing on the lower section of the display, press
the LCD button. Use the
, , , , and
the depth of the DSP effect as required for the
corresponding parts. Please note that DSP Effect
does not apply to the ORGAN voices. The depth
range is from "0" (no DSP effect) to "100" (maxi-
mum DSP effect depth).
When an ORGAN FLUTE voice is being used,
the most suitable DSP type is selected automati-
cally. Also the LEAD , RIGHT 1 and RIGHT 2
depth settings cannot be changed. The ORGAN
FLUTE depth setting can be changed via the OR-
GAN FLUTE LIST DISPLAY (see the ROTARY
SPEAKER DEPTH control on page 18).
parameters are
LCD button to
parameters when
to use the preset DSP
to
parameters are not
, ,
LCD dials to set
F5: Reverb/Chorus/DSP Effect
NOTES
• The default parameters will automatically be reselected when-
ever a new DSP effect type is selected.
• These parameters cannot be changed when an ORGAN FLUTE
voice is being used.
• Some of the DSP types include parameters which cannot be
selected or changed. Such parts will appear inverted.
NOTES
• In addition to the graphic depth controls directly above the LCD
dials, DSP effect depth for each part is represented by a vertical
bar to the right of the DSP EFFECT DEPTH parameter in the
upper section of the display. The longer the bar, the greater the
DSP effect depth.
• See page 153 for a list including descriptions of the DSP effects
and parameters.
121