Advertisement
Assembly Instructions
IMPORTANT:
Please read and follow all safety statements, warnings, assembly instructions, use &
care directions, before attempting to assemble
IMPORTANT:
1. When installing and assembling your gazebo, it is recommended that 4 or
more adults are involved.
2. Do not use the unit during an electrical storm, as there is a remote chance of
getting struck by lightning.
3. Do not climb on top of the gazebo. Falling off the gazebo can result in
serious injury, possibly even death.
4. Do not leave the gazebo assembled when there is a risk of high wind, as
possible damage will occur to the structure.
5. Never barbecue under this gazebo or use lanterns that contain open flames.
6. This package contains small items and plastic bags that should be kept
away from children.
7. Ensure that all connectors & poles are firmly secured fully in position. It is
important to do so before use so as to avoid collapsing or damage to the
item, which could result in injury.
L
ITEM#:L-GZ076PST-1A-4
Vineyard Gazebo
1
Advertisement
Table of Contents
Related Manuals for Sunjoy L-GZ076PST-1A-4
Summary of Contents for Sunjoy L-GZ076PST-1A-4
- Page 1 Assembly Instructions ITEM#:L-GZ076PST-1A-4 Vineyard Gazebo IMPORTANT: Please read and follow all safety statements, warnings, assembly instructions, use & care directions, before attempting to assemble IMPORTANT: 1. When installing and assembling your gazebo, it is recommended that 4 or more adults are involved.
- Page 2 Hardware Pack M5×15 mm Screw 56 PCS M5 Flat Washer 56 PCS M6 Nut 6 PCS M6×30 mm Screw 8 PCS M6 Flat washer 14 PCS Plastic Washer 4 PCS Stake 8 PCS Plastic Tie 48 PCS M5×45 mm Screw 8 PCS M6 Wrench 1 PC...
- Page 3 Parts List Parts List Pole 1 Pole 2 Pole 3 Pole 4 Pole 5 Fence Screen Corner connector Top pole Center fitting with hook Glass side bar top Side bar top support (preassembled on the side bar top Peg fitting 1 Peg fitting 2 Peg fitting 3 Canopy...
- Page 4 Step.1: Insert Fence (B) into Pole (A4 or A2), then fix (B) by pulling it down (Fig.1A). Assemble Fence (B) and pole with.Screw (HH) and Flat washer (BB) (Fig.1B). Step.2: Use Screw (AA) and Flat washer (BB) to connect Peg fitting (K) to Fence (B) and Pole (A4 or A2) (Fig.2).
- Page 5 Step.4: Use Screw (AA) and Flat washer (BB) to fix the Corner connector (D) to the poles (Fig4-1). Use Screw (AA) and Flat washer (BB) to assemble the Screen (C) and pole (Fig4-2). Use Screw (AA) and Flat washer (BB) to fix the Corner connector (D) and the Screen (C) (Fig4-3) Step.5: Use Screw (DD), Flat washer...
- Page 6 Step. 7: Use Screw (DD), Flat washer (EE) and Plastic washer (FF) to fix the Glass side bar top (G) to Pole (A3 and A4) and then use Wrench (WW) to tighten the screw, but not too tight so that the glass bar top can flip smoothly.
- Page 7 WARNINGS: 1. Assembly Instructions must be followed. 2. Pegs supplied must be used to hold this gazebo in place when upright. 3. Warranty does not cover damage due to extreme weather conditions. 4. Do not use candles, matches or open flames of any kind in or near a tent. 5.
Need help?
Do you have a question about the L-GZ076PST-1A-4 and is the answer not in the manual?
Questions and answers