Lens Parameter Card - GCC Technologies LaserPro StellarMark IFII Series User Manual

7.2 Lens Parameter Card

Before you start to operate the laser marker, the output scale of laser marker
and the G-Mark marking software must be adjusted to match each other.
Otherwise, the marking lines will be distorted or will have an improper scale of
the marking content.
Step 1. Take out the lens parameter card from the accessory kit
Step 2. Open G-Mark marking software
Step 3. Click on work area from property table and press "Lens Manager..."
`
StellarMark IFII-Series User Manual
85
Rev.5.0