Powering Up The Machine - GCC Technologies LaserPro StellarMark IFII Series User Manual

5.2 Powering Up the Machine

Make sure both StellarMark IFII-series and the computer is turned OFF
before connecting either one to a power source.
Step 1. Connect the male end of the marker Control Unit power cord to a
quality surge protector with connection to a proerly grounded outlet.
Step 2. Plug the computer to AC outlet.
Step 3. Connect the female end of the Control Unit power cord to the power
inlet located on the Control Unit's rear side.
NOTE
The Stellar Mark IFII-series is designed to work with 110~220 VAC,
50/60Hz, Max 5A.
`
CAUTION
StellarMark IFII-Series User Manual
36
Rev.5.0