5.3 Control Unit operating instruction
Step 1. Make sure "Power On" LED of the Control Unit is on.
Step 2. Turn the key switch on so you will be able to fire the laser OFF (Left)
/ ON (right).
Step 3. Press "LASER ON" button. The indicator light will alternately turn on
and ready to lasing.
NOTE
⚫
After finishing marking, push the LASER ON button again to turn
off laser output.
⚫
Please turn the key switch to the "Off" position if you would like to
turn off the machine.
`
StellarMark IFII-Series User Manual
38
Rev.5.0