Operating Environment - GCC Technologies LaserPro StellarMark IFII Series User Manual

NOTE
IFII-series laser machine is shipped with a single pair of safety
goggles. If additional safety goggles are required, please contact
GCC directly or an authorized GCC distributor. If you wish to
purchase one on your own, please make sure the safety goggles
meet these requirements:
• Connect the machine to a properly grounded power outlet. Ensure the
voltage of the power source is identical to the voltage of the machine.
• Do not attempt to modify or disassemble the laser module.
• Do not attempt to remove or modify any component of the machine's
laser interlock safety system.
• Ensure the immediate work area of the machine is well-ventilated.
Odors, vapors, and dust are byproducts generated during the laser
marking and cutting process. An exhaust system is recommended.
Please contact GCC or your local GCC distributor for more information.
• Do not laser heat-sensitive surfaces or materials that may generate
toxic fumes, such as PVC and Teflon.
• Regularly clean and maintain your machine according to our cleaning
and maintenance instructions. Doing so will ensure a machine that will
operate effectively and safely over a long period of time.
1.6

Operating Environment

Please follow the guidelines when considering a suitable location to set the
LaserPro StellarMark IFII-series. Improper work environments may lead to
operational malfunction and/or unsafe working conditions. The LaserPro
StellarMark IFII-series should be placed and operated in a clean environment,
avoid places where the machine is exposed to high temperatures, dust, or
`
190 - 534 nm OD5+
910 - 1,070nm OD6+
Visible Light Transmission: 23.5%
StellarMark IFII-Series User Manual
10
Rev.5.0