User Guide
GFK-3019G
Chapter 6: EtherNet/IP Machine Adapter
6.1
EtherNet/IP Machine Adapter Architecture
EtherNet/IP is an open, industry standard network protocol used by many industrial devices to
communicate over Ethernet networks. The EtherNet/IP Machine Adapter enables a Field Agent to read
data from an EtherNet/IP Field Device using either the Common Industrial Protocol (CIP) or the
Programmable Controller Communication Commands (PCCC) protocol and make this industrial data
available to the Predix Machine platform and Predix Cloud.
6.1.1
Features and Compatibility
The following table lists the EtherNet/IP Machine Adapter features and compatibility.
Features
Read data from CIP Field Device
(example: Rockwell Automation® CompactLogix™)
Write data to CIP Field Device
Read data from PCCC Field Device
(example: Rockwell Automation MicroLogix™)
Write data to PCCC Field Device
Predix Machine Version
6.1.2
Supported File Types
Supported file types when sending PCCC commands
The file type defines the type of data that a memory location contains, such as binary, integer, floating-
point, input, output, timer, counter, control, and so forth. The supported file types when sending PCCC
commands are as follows:
•
Binary (Ex: B3:1.0)
•
Integer (Ex: N7:0 or N7[0])
•
Float (Ex: F8:0)
•
Input (Ex: I1:0.0)
•
Output (Ex: O1:0.0)
•
Timer (Ex: T4:0.DN)
•
Counter (Ex: C5:0.DN)
•
Control (Ex: R6:0.DN)
EtherNet/IP Machine Adapter
EtherNet/IP Machine Adapter
Yes
No
Yes
No
17.1
Chapter 6
Oct 2019
35