Emerson PACSystems User Manual page 12

User Guide
GFK-3019G
File
com.ge.dspmicro.w
ebsocketriver.send-
0.config
org.ops4j.pax.loggi
ng.cfg
Note: There is a distinction between the <Predix Machine Application/Configuration Template Directory>
You can revise multiple files via EdgeManager and then schedule the deployment at once.
The steps to configure the EGD Machine Adapter are:
com.ge.ac.machineadapter.egd.config
1. Open the file com.ge.ac.machineadapter.egd.config for editing.
2. Note that the file is divided into three sections:
EGD Machine Adapter
Source
<Predix Machine
Configuration Template
Directory>\configuration\
machine
<Predix Machine
Configuration Template
Directory>\configuration\
machine
and the <Application/Configuration Template>. The <Application/Configuration Template> refers to
the application and configuration that you will deploy to EdgeManager. The <Predix Machine
Application/Configuration Template Directory> refers to the actual application and configuration
directory in your Predix Machine (modifiable through EdgeManager).
• LIKELY TO CHANGE – configurations that require modifications.
network-interface could be a range of IP addresses in the following
—
format: x.x.* where x is any integer number between 0 and 255 or a
specific IP address. The * indicates that the subset of the network x.x that
is allowed. The Machine Adapter will go through all the network
interfaces defined on the Field Agent and listen to the first network
interface that it finds that matches this configuration, i.e. if the input is
172.16.*, then it will listen on UDP (101) or the PDH (201).
subscriptionName is the name of the subscription provided by the EGD
—
Machine Adapter. Please note that this name must match the value in
com.ge.dspmicro.hoover.spillway-0.config
com.ge.dspmicro.hoover.spillway.dataSubscriptions. Renaming this
variable will require a restart or reboot of the Field Agent. The default
value is "EGDSub1".
• MAY HAVE TO CHANGE – configurations that may require modification,
but likely do not.
name is the name of this Machine Adapter.
—
description is the description of this Machine Adapter.
—
Deployment Modification
Destination
<Predix Machine Required for
Configuration sending data to
Template the cloud
Directory>\configura
tion\machine
<Predix Machine Optional for
Configuration debugging
Template
Directory>\configura
tion\machine
Chapter 3
Oct 2019
under
8