Table of Contents
Advertisement
CHAPTER 2. CONNECTION AND PREPARATION
2-6
Using a Carrier Sheet for Letter Size media
Do not use media larger than 210 mm in width.
1.
Peel off the liner inside and on both sides of the carrier sheet, so that the
adhesive surface is visible.
Liner
Peel off the liner inside and on both
sides of the backing sheet.
2.
Press the media onto the adhesive surface of the carrier sheet, making sure that
the edges of the media are aligned with the carrier sheet.
When pressing the media, be careful not to cause air bubbles or
wrinkles in the media.
Adhesive surface
Media
Carrier sheet
Advertisement
Table of Contents
Need help?
Do you have a question about the Craft ROBO CC100 and is the answer not in the manual?