Edited Parameters - Pepperl+Fuchs OHV110-F228-R2 Manual

OHV110-F228-R2
Configuration
4.3.7

Edited Parameters

Here you can find an overview of all settings you have changed that now deviate from the fac-
tory settings.
To generate a control code that contains all affected settings, click on Create control code for
own settings.
If you check the First completely reset sensor check box, a reset command is integrated in
the control code. When the control code is read, all settings are first reset to factory defaults
before the new settings are applied.
Note
Scripts for processing the read result are not included in this overview.
Tip
This function allows your configured settings to be transferred to multiple sensors by scanning
the control code.
23