Operation Using A Mounting Bracket - Pepperl+Fuchs OHV110-F228-R2 Manual

OHV110-F228-R2
Operation
5.2

Operation Using a Mounting Bracket

The handheld reader features a motion detection system. If motion detection is activated, the
handheld reader automatically attempts to read a code as soon as a movement is detected in
the read range. It is not necessary to actuate the trigger button.
If the OHV-BRACKET is used, the handheld reader is set at the factory in such a way that
motion detection is automatically activated when the handheld reader is inserted into the
bracket and automatically deactivated when the handheld reader is removed from the bracket.
However, you can change this setting.
Figure 5.2 Operation using a mounting bracket (schematic diagram)
35