Rear Panel; Table 3: Sbg6400 Rear Panel Ports & Connectors; Figure 2 - Sbg6400 Rear View - Arris SURFboard SBG6400 User Manual

Product Overview

Rear Panel

Port Name
Reset Button
SURFboard SBG6400 Wireless Gateway • User Guide
365-095-26377 x.3
Figure 2 – SBG6400 Rear View
Table 3: SBG6400 Rear Panel Ports & Connectors
Description
Two one-gigabit, 2.4 GHz only Ethernet ports for RJ-45 cable
connections:
Green - LED is ON - Indicates a device connection is detected
Green - LED is Blinking - Indicates data traffic is in progress
Amber - LED is ON – Indicates 10/100 Base-T connection(s)
Amber - LED is OFF – Indicates GigE connection(s)
USB 2.0 port connection to your USB device
Can be used to reboot the gateway or reset the gateway settings.
To reboot (or restart) the gateway, press the indented Reset button
once using the end of a paper clip or other small object with a
narrow tip, and then release.
To reset the gateway configuration back to the factory default
settings, press and hold the indented Reset button for 15 seconds
using the end of a paper clip or other small object with a narrow
tip, and then release.
See Reset Your Gateway Settings
alternative method to reset the gateway settings using the
SBG6400 Web Manager.
Copyright 2015 ARRIS Enterprises, Inc. All Rights Reserved.
for more information on an
5