Set Up A Wireless Network Using Your Computer - Arris SURFboard SBG6400 User Manual

Setting Up a Wireless Network Connection
13. Click Apply to accept the wireless network settings and open the Settings Applied screen or
click Previous to go back and change your wireless network name and/or user password.
Wait for your wireless network settings to be saved. When it is complete, the Settings
Applied screen will open.
Figure 12 – SBG6400 Quick Start Wizard-Step 6 of 6 Screen
14. Click Exit on the Settings Applied screen to close the SBG6400 Quick Start Wizard.
Note
: You can click
printer. This can handy for keeping a record of your new wireless network settings.

Set Up a Wireless Network Using Your Computer

Use one of the following options to create your wireless network:
•
Quick Connect Using the Windows Taskbar
•
Connect Using the Windows Control Panel
Note
: The steps for setting up a wireless network may differ slightly depending on the Windows
operating system running on your computer. The steps used here apply to Windows 7.
SURFboard SBG6400 Wireless Gateway • User Guide
365-095-26377 x.3
Print
to print a copy of your wireless network settings from a connected
Copyright 2015 ARRIS Enterprises, Inc. All Rights Reserved.
15