Star Network Modem
6.2.3 UDP Server instructions
(1) UDP operation and TCP operation are basically the same, as shown in Figure 15, set the protocol type to UDP
Server, static IP address (example: 192.168.4.22) and local port (12345).
(2) Open the network test tool as shown in Figure 16, Create connection -> select UDP, write the target IP (static IP
address of the UDP server), write the port (local port of the UDP server) -> connecting , using the "Ebyte network
configuration tool" "to monitor the transmitted data.
Chengdu Ebyte Electronic Technology Co., Ltd.
17
Figure 14 Data transparent transmission
Figure 15 Parameter setting instructions
E70-DTU(433NW30-ETH)_User Manual