Ebyte E70-DTU User Manual page 21

Star Network Modem
（1）Connect E70-DTU(433NW30-ETH) network cables to PC, connect E70-DTU(433NW30) RS485 or RS232 to PC, open
the network configuration software and search for the device. The searched device will display the device list. Double-click
the device to be configured in the list and enter the setting interface. Set the module to UDP Server mode, set the target IP
address to 192.168.4.22, set the target port of module to 8882, set the RF parameters, click the OK button after the setting is
Chengdu Ebyte Electronic Technology Co., Ltd.
18
Figure 16 Connection settings
Figure 17 Data transparent transmission
E70-DTU(433NW30-ETH)_User Manual