Ebyte E70-DTU User Manual page 31

Star Network Modem
Example：AT+ TFCFG=0
AT+ TFICFG Setting/Querying input transmission format configuration (reboot valid)
AT+ TFICFG=？
8
AT+ TFICFG=Value
（valid for coordinator only）
Example：AT+TFICFG=0
AT+TMCFG Setting/Querying transport mode configuration (reboot valid)
AT+TMCFG=?
9
AT+TMCFG=Value
Example：AT+TMCFG=0
AT+ PIDCFG Setting/Querying PANID configuration（reboot valid）
AT+PIDCFG=？
10
AT+PIDCFG=Value
Example：AT+PIDCFG=65535
AT+ DMCFG Setting/Querying dormancy time configuration(reboot valid)
AT+DMCFG=？
11
AT+DMCFG=Value
Example：AT+DMCFG=0
AT+RSCFG Setting/Querying the reboot parameter configuration(reboot valid)
AT+RSCFG=?
12
AT+RSCFG=Value
Example：AT+RSCFG=0
Note: This parameter can be used for node disconnection detection. It is recommended to open it.
Chengdu Ebyte Electronic Technology Co., Ltd.
28
3：Output: Valid Data+RSSI
4：Output：Valid Data+Long Address+Short Address
5：Output：Valid Data+Long Address+RSSI
6：Output：Valid Data+Short Address+RSSI
7：Output：Valid Data+Long Address+Short Address+RSSI
Description:
Gets input transmission format configuration
Response：
TFICFG:0
Description:
Value：0~2
0：Input Broadcast(Only the coordinator works)
1: Input Short Address+Data (0x0000 0xfff) are broadcast address
2: Input Long Address+Data (0x000000000000 0xffffffffffffffff） are broadcast
address
Description:
Gets transport mode configuration
Response：
TMCFG:0
Description：
Value：0 or 1
0：Long Range mode，LRM
1：Standard transmission mode,GFSK
Description:
Gets PANID configuration
Response：
PIDCFG:65535
Description:
Value:0~65535
Description:
Gets dormancy time configuration
Response:
DMCFG:0
Value: dormant time, per unit second (MS), When the value is less than 2, the
system will change to 2 (minimum 2 seconds)
Description:
Gets the reboot parameter configuration
Response：
RSCFG:0
Description:
Value：0 or 60~65535（S）
When the value less than 60s, the system judges 60, equals 0s, does not restart
E70-DTU(433NW30-ETH)_User Manual