Ebyte E70-DTU User Manual page 14

Star Network Modem
Double-click the left mouse button to search for the device or click "Configure Device" to enter the configuration mode—>RF
Settings—>AT Send, click "Enter AT" to configure the parameters. You need to set one device to the Coordinator mode. The
other devices are set to node mode (factory default mode 4, this mode is only applicable to E70-DTU (433NW30)). After
setting the parameters, click "Restart device", then the parameter setting is valid.
Chengdu Ebyte Electronic Technology Co., Ltd.
11
Figure 5 Parameter setting instructions
Figure 6 Parameter setting instructions
E70-DTU(433NW30-ETH)_User Manual