Tcp Client Instructions - Ebyte E70-DTU User Manual

Star Network Modem

6.2.2 TCP Client instructions

1) Similar to TCP Server operation, as shown in Figure 10, if use the network test tool, the target address must be set to
match the computer network card (for example: wired network card is 192.168.4.2, target port is 8889).
As shown in Figure 11, Create Server in the server mode ", set the local port same to the TCP Client target port (Example:
8889) -> Start the server.
Chengdu Ebyte Electronic Technology Co., Ltd.
14
Figure 10 Parameter setting instructions
E70-DTU(433NW30-ETH)_User Manual