PL70MTR DISH
®
Recommended Tools, not Provided:
Parts
DISH Playmaker antenna
on mount base plate
DISH Wally
®
receiver + remote
25' Coax
Specifications
DISH Playmaker Antenna
•
Powered through included DISH
HD Solo receiver at 120 VAC
power source
•
Easy-grip handle included for
effortless carrying
•
For stationary use only; must
be in fixed position during use;
remove from vehicle and store
before driving
•
Receives programming from
satellites: 110, 119, 129 or 110,
119, 61.5
•
Equipped with 1 coax input
•
25' coax cable included
•
16" diameter; 13" tall; 7 lbs
1
Playmaker
Trucking Bundle
®
Phillips screwdriver, 5/16" drive
Back
Support (1)
10-32 x 1/4"
Screw (3)
Mounting screw
(10)
DISH Wally Receiver
•
DISH Mobile HD Solo Satellite
TV Receiver
•
Superior user interface includes
Apps and On Demand - just like
at home
•
Supports both HD and SD
programming
•
Smallest and fastest mobile
receiver available
•
Remote Finder lets you find your
remote with the touch of a button
•
10.41" h x 8.29" w x 1.60" d;
1.6 lbs
Model may vary from receiver shown
For stationary use only
Exterior bracket (2)
Clip (1)
Handle (1), screws (2)
Rubber
bumper (2)
3" x 3" Plastic film
(2) (not shown)
WARNINGS
Do not place the unit in water, or areas
!
where water may pool, as pooling water
could damage the electronics.
Do not install or operate the antenna in
!
winds of 35 mph or greater. The antenna will
roll in winds ≥35 mph.
Care should be taken when transporting
!
and setting up the antenna. Do not toss or
drop the antenna.
Do not paint the antenna. Painting the
!
antenna may cause signal degradation and
will void your warranty.
!
Do not remove dome cover from base
unless specifically instructed by Winegard
Technical Service. Interaction with internal
parts could make the system inoperable
and/or cause injury.
Compatible Satellites
The DISH Playmaker antenna with OS2.1
can receive programming from DISH
western arc, which includes satellites 110,
119, and 129 or DISH Hybrid 110, 119,
and 61.5.