Table of Contents
Advertisement
Receiver Setup for a New Wally
The Wally receiver will go through an Installation Wizard to help
with the setup process.
Follow the on-screen instructions to program the remote control.
Step 1 of the Installation Wizard will pair the remote to the
receiver. During Step 2, the unit will need to acquire satellites
and may update the receiver (figures 1-6).
This step will require a search initiated by the Mobile Setup
screen. Fill in the required information, and then select "Scan"
to begin the search routine (figures 1-3).
Figure 1
Figure 2
Figure 3
Receiver
®
Figure 4
During the search routine, the antenna will scan for satellites.
The antenna may make a slight grinding sound when searching for
satellites; this is normal and does not harm the unit.
Once the search routine is complete, the receiver may update
(figure 5).
Figure 5
To activate the receiver, call Winegard Company at 1-800-288-
8094 (Option 2)."
Figure 6
.
4
Advertisement
Table of Contents
