Advertisement
|
DISH
Playmaker
Antenna
DISH
Playmaker
Dual Antenna
®
®
®
®
Portable Automatic Satellite TV Antennas
Instruction Manual
www.winegard.com/playmaker
For receivers and programming, call 1-866-593-0348
For help, email help@winegard.com or call 1-800-788-4417
DO NOT RETURN ANTENNA TO PLACE OF PURCHASE
2452389
Rev1 8-17
Advertisement
Table of Contents
Related Manuals for Winegard DISH Playmaker
Summary of Contents for Winegard DISH Playmaker
- Page 1 DISH Playmaker Dual Antenna ® ® ® ® Portable Automatic Satellite TV Antennas Instruction Manual www.winegard.com/playmaker For receivers and programming, call 1-866-593-0348 For help, email help@winegard.com or call 1-800-788-4417 DO NOT RETURN ANTENNA TO PLACE OF PURCHASE 2452389 Rev1 8-17...
-
Page 2: Specifications
Parts Compatible Receivers DISH Playmaker Antenna / DISH Playmaker Dual Antenna The DISH Playmaker antennas must be used with DISH Solo ® ® ® ® HD receivers. Examples of DISH Solo HD receivers include 25 ft Coaxial Cable DISH 211z, 211k, 211, 411 and Wally receivers. -
Page 3: Installing The Handle
® ® Connect a coax cable from the DISH Playmaker antenna coax Locate the handle and the two port to the “Sat In” port on the side of the receiver. The DISH screws in the hardware bag inside Playmaker Dual antenna has 2 ports with molded-in text the box. - Page 4 Fill in the required information, and then select “Scan” to begin the search routine (figures 1-3). Figure 4 If not already activated, the receiver will need to be activated (figure 5). To activate the receiver, call Winegard Company at 1-866-593-0348. Figure 1 Figure 5 The receiver may reboot automatically as part of the update process (figure 6).
- Page 5 Updating Receiver Software Select the state of your current location, and then select “Scan” to begin the search routine (figure 9). For optimal performance, update receiver software occasionally. To allow the software to update, leave the satellite on signal, and press the Power button on the remote or front panel of the receiver;...
- Page 6 Setup for a Secondary Receiver Press “Test Installation 5” to start the Check Switch test (figure 15). After completing the setup on the main receiver, power on the secondary receiver. If using a new receiver, you will be guided through the setup by the Installation Wizard; follow the on-screen steps to complete the setup.
-
Page 7: Maintenance
(2) this device must accept any interference received, including interference that The DISH Playmaker / DISH Playmaker Dual are NOT intended to be may cause undesired operation. mounted onto over-the-road trucks or for marine applications. -
Page 8: Troubleshooting
If a defect in material or workmanship is discovered, Customer may take the product to an authorized Winegard dealer for service. Customer must provide proof of purchase to verify the product is under warranty. If the product is brought to an authorized Winegard dealer for service prior to expiration of year one (1) of the warranty period and a defect in material or workmanship is verified by Winegard Technical Services, Winegard Company will cover the Winegard dealer’s labor...