Yamaha DIGITAL MIXING STUDIO 01X Owner's Manual page 150

Specifications
■ Input/Output Specifications
Analog Input
MIC/LINE INPUT 1, 2
MIC/LINE INPUT 3 – 8
MIC/LINE INPUT Hi-Z
Analog Output
MONITOR OUT (L, R)
STEREO/AUX OUT (L, R)
PHONES
Digital Input/Output
DIGITAL IN, OUT
MIDI IN, OUT A/B
mLAN 1/2
FOOT SWITCH 1/2
■ Control
Analog Input Gain
Section
Monitor Volume
Phantom Switch
Power Switch
Faders
Knobs/Dial
Panel Switches MODE
PAGE
MIXER/LAYER
FUNCTION
DISPLAY
BANK
CHANNEL
TRANSPORT
CURSOR
Others
Display LCD
■ Others
Supplied Accessories
Power Consumption
Dimensions
Weight
Operating free-air temperature range
* Specifications and descriptions in this owner's manual are for information purposes only. Yamaha Corp. reserves the right to change or modify
products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please
check with your Yamaha dealer.
150
01X Owner's Manual
Connector
XLR type, Balanced, -46 dB – +4 dB
+48 V +3 V/-3 V Phantom
TRS Phone, Balanced -46 dB – +4 dB
Phone, Unbalanced -46 dB – +4 dB
Connector
Phone, Unbalanced -10 dBV
Phone, Unbalanced -10 dBV
TRS Phone, Unbalanced
Connector
RCA PIN IEC-60958 Consumer use
DIN (5 pin) MIDI
IEEE 1394 (6 pin) IEEE 1394/FireWire
PHONE
LINE/MIC Gain Knob 1 – 8 (+4 dB – -46 dB)
MONITOR/PHONES Knob
PHANTOM (+48 V) ON-OFF (rear panel)
STANDBY/ON switch (rear panel)
Faders 1 – 8, STEREO Fader
∞
60 mm motorized, 0 – -132 – - dB
Channel knobs 1 – 8 (Data Entry)
Rotary Encoder Dial (Song Position)
INTERNAL, REMOTE, SCENE, UTILITY [BACK UP], MONITOR
SELECTED CHANNEL [LIBRARY], EQ-LOW, EQ-LOW-MID, EQ-HIGH-MID, EQ-HIGH, PAN [CH PARAM],
SEND [INST], DYNAMICS [PLUG-IN], GROUP, EFFECT
AUDIO/1-8, INST/9-16(mLAN), MIDI/17-24(mLAN), BUS-AUX/MASTER, OTHER
F1 [TRACK], F2 [MIXER], F3 [LIST], F4 [CLOSE], F5, F6, F7, F8
UP, DOWN, DISPLAY SHIFT, NAME/VALUE [METER]
,
SEL 1 – 8, STEREO SEL, ON 1 – 8, SOLO, REC RDY, AUTO EDIT, AUTO R/W
REWIND, FORWARD, STOP, PLAY, RECORD, LOOP, MARKER, MARKER-WRITE
UP, DOWN, LEFT, RIGHT, ZOOM
EDIT, UNDO, SAVE, FLIP, SHIFT, SCRUB
55 x 2 character LCD (backlit)
Power Adaptor (PA-300), Owner's Manual set, CD-ROM x 2, mLAN (IEEE 1394) cable
21 W
453(W) x 391(D) x 116(H) mm (including channel knobs' height)
6.2 kg
10 – 35°C
Input level
Nominal Max. before clip
+18 dB
+18 dB
+18 dB
Output level
Nominal Max. before clip
+4 dBV
+4 dBV
100 mW + 100 mW
(40 Ω load)
Format Recommended output level
0.5 Vpp/75 Ω
–
–
Input Impedance
3 kΩ
3 kΩ
500 kΩ
Actual Load Impedance
10 kΩ
10 kΩ
8 – 40 Ω
Other details
SRC On/Off is possible on
the input side, Dither On/
Off possible on the output
side
–
–