Layer Selection/Channel Selection - Yamaha DIGITAL MIXING STUDIO 01X Owner's Manual

Basic Operations

Layer selection/Channel selection

The Input Channels and Output Channels are arranged into layers, as illustrated below. There are four layers altogether.
The currently selected layer determines the function of the channel strip, [SEL] buttons, [ON] buttons, and faders. Use the
LAYER buttons to select a layer you wish to edit using the channel strip controls. The following table shows the layers that
you can access using the LAYER buttons, and the parameters you can control using the channel strips on each layer.
LAYER buttons
[1-8] lights
[9-16] lights
[17-24] lights
[MASTER] lights
• The STEREO [SEL] button, [ON] button, and STEREO fader always control the Stereo Out signal, regardless of the Layer
settings.
40
01X Owner's Manual
Input Channel Layer
1 – 8
Input Channel Layer
9 – 16 (mLAN1 – mLAN8)
Input Channel Layer
17 – 24 (mLAN9 – mLAN16)
(48kHz/44.1kHz mode only)
Master Layer
Channel Strips
1-8
1-8
1-8 mL9-mL16
1
3-6
7/8
Display
CH1-CH8 Input Channels 1-8
mL1-mL8 Input Channels 9-16 (mLAN1-mLAN8)
Input Channels 17-24 (mLAN9-mLAN16)
BUS REC Bus Out master
AUX1-4 AUX Bus 1-4 masters
Stereo Inputs 1/2
STI1/2
(Stereo Input 2 is 48kHz/44.1kHz mode only)
Channels can be operated